Aluminium Tilt And Turn Window Hardware Manufacturers

Since 2003, WANO has designed and manufactured complete window and door hardware systems at a 38,000 m² facility in Ningbo, Zhejiang, China. Our Aluminium Tilt And Turn Window Hardware Manufacturers range covers UC groove, C groove, PVC U-groove and timber rebate systems, supplied as matched sets or individual components. Fabricators, window system brands, architectural hardware dealers and project clients use our hardware in residential villas, apartments, hotels, commercial buildings and public buildings.

R&D, tooling, die casting, stamping, machining, surface treatment and automated assembly run inside our own factory, so groove geometry, locking-point position and finish remain consistent from first sample to volume delivery.

Range Built Around the Profile System

The catalogue is organised by profile groove rather than window brand, because groove geometry, sash weight and opening type decide which hardware family fits a given window series. Each tilt and turn set is released as a matched group — hinges or stays, espagnolette gearbox, corner transmissions, drive bars, locking points, keepers and handles — or as individual components for fabricators maintaining their own kit lists.

Tilt & Turn Families and Where They Fit

Opening Configuration and Sash Load Engineering

Tilt and turn hardware must deliver two operations on one sash without compromising either, so the set is configured around sash geometry and the way the window will be used in service. For example, our C Groove Tilt & Turn 90/180° Hardware shares one handle and locking platform across the C groove range, simplifying sash schedules in mixed facades.

• Turn opening at 90° or 180° with tilt-first or turn-first sequencing matched to the frame and fitting position.
• Controlled ventilation via restrictors and limited tilt travel where required.
• Fall-prevention and anti-error mechanisms that block incorrect operating sequences.
• Multi-point locking with espagnolette gearbox, corner transmissions, adjustable drive bars and keepers positioned against sash height.
• Hinges and stays load-rated to sash weight, with 3D adjustment ranges for compression and alignment.
• Handles with key locking, square or rounded profiles, multiple grip thicknesses and ergonomic operating force.

Materials, Surface Finish and Private Label

The in-house tooling workshop converts product data into production tooling, holding groove geometry and finish consistent through volume production. For aluminium hardware we offer powder coating, electrophoretic coating and anodizing, with corrosion-focused treatment specified for coastal and high-humidity installations.

• Handle profiles, curvature, grip thickness and square or rounded styling customised to your range.
• Custom textures and colours for handles and hinges to match interior design languages.
• Brand logo applied to visible surfaces by laser engraving, screen printing or die-cast integrated molding.
• Unit boxes, outer cartons, certificates and packing lists rebranded, with neutral or brand-exclusive options.

Quality Control and Acceptance Testing

Fifteen specialised laboratories oversee quality from incoming material and first-article inspection through in-process control to final pre-shipment verification. Core testing capabilities include:

• Torque and operating force testing — handle effort kept ergonomic and within industry expectations.
• Load and tensile testing — ultimate load-bearing capacity of hinges and locking points verified before release.
• Opening/closing cycle testing — tens of thousands of cycles to confirm durability and smooth running.
• Salt spray resistance testing — surface treatment performance confirmed for coastal and high-humidity environments.
• Rain penetration, wind pressure and immersion machines support project-specific test scheduling.

Installation, Documentation and Spare Parts Support

Hardware is released against the profile drawing, not against a window brand. We confirm groove dimensions, fixing patterns, handing and locking-point positions before tooling, then support fabricators during first-article fitting with component schedules, fitting instructions and sample hardware for trial assembly.

• One hardware schedule per window type for installation teams across the facade.
• Consumables and replacement components — keepers, gaskets, fixing screws — packed with the main hardware sets.
• Documentation pack with fitting instructions, component schedules and test reports for the delivered batch.
• Routine maintenance concentrated on hinge adjustment, locking-point engagement and surface cleaning.

Information We Use to Configure Your Solution

A proposal comes back as a defined hardware set rather than a list of loose parts. These inputs let us match groove, load rating and locking layout in one pass:

• Profile system and groove type — UC groove, C groove or uPVC U-groove, plus the extrusion drawing with groove dimensions.
• Sash data — width, height, weight and glazing build-up, with handing for each opening.
• Opening type and angle — tilt & turn 90°/180°, casement, outward opening casement or top-hung.
• Service conditions — coastal or high-humidity exposure, wind load expectations and acoustic requirements.
• Handle specification — profile, grip thickness, finish colour, key locking and operating force preference.
• Safety features — restrictors, fall prevention and anti-error sequencing.
• Brand and packaging requirements — logo method, carton marking and channel presentation.
• Order data — volume per window type, delivery schedule and project destination.

Frequently Asked Questions

Which aluminium window profiles do your tilt and turn hardware sets fit?

We build for European-standard UC groove and C groove aluminium extrusions, as well as uPVC U-groove and timber rebates. Send the groove dimensions and sash data and we confirm the matching hardware family.

Can you supply complete sets as well as individual components?

Both. Multi-point locking sets, hinges, friction stays, handles, locking points and keepers can be ordered as one matched set or as separate components for fabricators maintaining their own kit lists.

What opening angles and sash loads can be configured?

We supply 90° and 180° turn versions with tilt ventilation, and size hinge load ratings, groove dimensions, drive bar lengths and locking point layouts to the sash weight and frame geometry of the project.

How is corrosion resistance handled for coastal projects?

Surface treatment is selected for the exposure class — powder coating, electrophoretic coating or anodizing — and verified through salt spray resistance testing in our laboratories before the finish is released for volume production.

Do you support private label branding and branded packaging?

Yes. Handles and visible components carry your logo through laser engraving, screen printing or die-cast integrated molding, and unit boxes, outer cartons, certificates and packing lists are produced with your brand identity.

What does the project process look like from drawing to delivery?

Requirement consultation, drawing or sample confirmation, technical assessment and solution proposal, sample development and testing, pricing confirmation, mass production, quality inspection, then packaging and delivery — with one hardware schedule per window type for site reference.